HP's Well Hidden Secret Blade Server

bl2x220cg5

BL2x220c G5 (2 server "nodes" shown)

HP’s BladeSystem server offering is quite extensive – everything from a 4 CPU Intel blade to an Itanium CPU blade, however their most well hidden, secret blade is their BL2x220c blade server.  Starting at $6,129, this blade server is an awesome feet of design because it is not just 1 server, it is 2 serversin 1 blade case – in a clam shell design (see below).  This means that in a HP C7000 BladeSystem chassis you could have 32 servers!    That’s 64 CPUs, 256 CORES, 2TB of RAM all in a 10U rack space.  That’s pretty impressive.  Let me break it down for you.  Each “node” on a single 2 node BL2x220c G5 server contains:

  • Up to two Quad-Core Intel® Xeon® 5400 sequence processors
  • Up to 32 GB (4 x 8 GB) of memory, supported by (4) slots of PC2-5300 Registered DIMMs, 667 MHz
  • 1 non-hot plug small form factor SATA or Solid State hard drive
  • Embedded Dual-port NC326i Gigabit Server Adapter
  • One (1) I/O expansion slots via mezzanine card
  • One (1) internal USB 2.0 connector for security key devices and USB drive keys

BL2x220

 

 

 

 

 

 

 

You may have noticed that this server is a “G5” version and currently has the older Intel 5400 series processors.  Based on HP’s current blade offering, expect to see HP refresh of this server to a “G6” model that will contain the Intel® Xeon® 5500 series processors.  Once that happens, I expect for more memoryslots to come with it, since the Intel® Xeon® 5500 series processors have 3 memory channels.  I’m guessing 12 memory slots “per node” or 24 memory slots per BL2x220c G6.  Purely speculation on my part, but it would make sense.  

Why do I consider this server to be one of HP’s best hidden secrets?  Simply because with that amount of server density, server processing power and server memory, the BL2x220c could become a perfect virtualization server.   Now if they’d only make a converged network adapter (CNA)…