Monthly Archives: November 2010

Fujitsu Teams up with NetApp to Design a Storage Blade

Continuing with my theme from yesterday of “purpose-built” blade servers, today we take a quick look at a new offering from Fujitsu.  Now, as you may have noticed, my site has traditionally been focused on blade servers from Cisco, Dell, HP and IBM but this offering from Fujitsu is so interesting, I figured I would write something up.Titled under the PRIMERGY SX label, Fujitsu’s storage blades combines Data ONTAP-vTM software from NetApp, blade hardware and an unknown hypervisor to create a “fully integrated virtual storage appliance.”   The storage solution supports iSCSI, CIFS and NFS protocol and is based on Data ONTAP-vTM features such as SnapShot, FlexVol, SnapRestore and FilerView.

The storage blades come in two flavors:

PRIMERGY SX960 S1 – a storge blade that can hold up to 10 additional hot-plug SAS or SATA HDD/SSD.  These drives offer high capacity with up to 5 TB SATA HDDs, 3 TB with top-quality 2.5- inch SAS drives and up to 640 GB with power-saving 2.5-inch SATA SSDs.  The only catch is that you can only fit 2 of these storage blades into a single chassis.Fujitsu PRIMERGY SX960 S1

PRIMERGY SX940 S1 -a storge blade that can hold up to 4 additional hot-plug SAS or SATA HDD/SSD.  These drives offer high capacity of up to 584 GB with high quality SAS drives, up to 2 TB with SATA HDDsFujitsu PRIMERGY SX940 S1.

I understand that Fujitsu is nearly non-existent in North America, but overseas they are well-known.  As well, the purpose of this post to showcase that Fujitsu is putting NetApp’s software expertise onto a blade footprint to be used as a single purpose – to create a virtual storage array.  As blade servers become more more mainstream, I expect to see more vendors team up to offer these types of integrated solutions.

For more information on Fujitsu’s servers, please visit:
http://ts.fujitsu.com/products/standard_servers/blade/bx400/storageblades.html

A special thanks to Chris Mellor for his write-up on this Fujitsu offering as seen on theregister.co.uk. Сайт знакомств

groupon houston
alcohol poisoning symptoms
endometriosis symptoms
foundation grants
strep throat contagious

Another Hidden HP Secret: P4000sb Storage Blades

HP P4000sb Storage BladeI recently found another hidden gem within HP’s arsonel of offerings that combines the HP StorageWorks line with the HP Proliant BladeSystem line.  The solution is found within an HP bundle titled, “HP StorageWorks P4800 G2 63TB SAS BladeSystem SAN Solution” and is quite an offering. Continue reading →

Still Confused About Cisco’s Blade Market Share

I recently received a comment  on my previous post concerning Cisco’s market share (“What’s the Truth About Cisco’s Market Share“) which has me more confused.  The comment admits that Cisco has not released any market share data to IDC, but that when you look at the Cisco Q1 2010 Earnings Call and compare it to IDC’s findings of the overall industry you should be able to derive conclusions from there.  That’s where it gets confusing. Continue reading →

Featured on CRN

As I previously wrote about, I had the pleasure of being a panelist in an upcoming ComdexVirtual session that is happening this week.  The ComdexVirtual team was nice enough to give me a few paragraphs on the CRN.com website to speak on the Blade Server of the Future, so I hope you will take a few minutes and check it out.  Let me know what you think.  Possible, or am I just a dreamer?
Сайт знакомств

citi student loans
nba schedule 2012
lenox square mall
pulaski high school
act question of the day

(UPDATED) How IBM Can Provide 1,800 Processing Cores on a Single Blade Server

UPDATED 11-16-2010

IBM BladeCenter GPU Expansion Blade with HS22IBM recently announced a new addition to their BladeCenter family – the IBM BladeCenter GPU Expansion blade.  This new offering provides a single HS22 with the capability of hosting up to 4 x NVIDIA Tesla M2070 or Tesla M2070Q GPUs each running 448 processing cores each.  Doing the math, this equals the possibility of having 4,928 processing cores in a single 9u IBM BladeCenter H chassis.  That means you could have 19,712 processing cores PER RACK.  With such astonishing numbers, let’s take a deeper look at the IBM BladeCenter GPU Expansion blade.  

Continue reading →

The Best Blade Server Option Is…[Part 2 – A Look at Dell]

Updated 11/4/2010 at 3:51 p.m. Eastern
-added links to Remote Console sessions on 11G blade servers
 
One of the questions I get the most is, “which blade server option is best for me?” My honest answer is always, “it depends.” The reality is that the best blade infrastructure for YOU is really going to depend on what is important to you. Based on this, I figured it would be a good exercise to do a high level comparison of the blade chassis offerings from Cisco, Dell, HP and IBM. If you ready through my past blog posts, you’ll see that my goal is to be as unbiased as possible when it comes to talking about blade servers. I’m going to attempt to be “vendor neutral” with this post as well, but I welcome your comments, thoughts and criticisms.   In today’s post, I’ll cover Part 2 of the series where I dig into Dell’s offering – so get a cup of java, sit back and enjoy the read. Continue reading →

A Post from the Archive: “Cisco UCS vs IBM BladeCenter H”

It’s always fun to take a look at the past, so today I wanted to revisit my very first blog post.  Titled, “Cisco UCS vs IBM BladeCenter H”, I focused on trying to compare Cisco’s blade technology with IBM’s.  Was I successful or not – it’s up to you to decide.  This article ranks at #7 in all-time hits, so people are definitely interested.  Keep in mind this post has not been updated to reflect any changes in offering or technologies, it’s just being offered as a look back in time for your amusement.  Here’s how the blog post began: Continue reading →