Many females experience no symptoms of endometriosis. Symptoms and mass can appear at varies stages of this disease. Some symptoms of endometriosis females have certain signs during and through their menstrual cycle and some don’t. While females who experience painful mild to moderate cramps in their pelvic area caused by endometriosis. Yet, others have no pain but still have masses visual for doctors to see during check-ups Females who do experience pain, tend to have greater pain in the beginning of their cycle, which pain lessons towards the end of the cycle.

Studies suggest that females who do have symptoms of pain it usually occur in the early stages in the pelvic area. Heavy menstrual cramps have been reported, as well as low back pain and pain during sexual intercourse. Studies and historical reports have shown symptoms of endometriosis can produce painful bowel movement or pain around the rectal area. There appears to be no explanation of why certain females experience pain, while others have no pain or tell tell signs, other than mass discovered during examination.

Recent studies show that somewhere 20% to 40% of females who have been found with fertility problems, it was caused by endometriosis. This disease can be treated with proper medication given at the early stages. Studies also suggest that early diagnosis and treatment could possibly correct or even cure symptoms of endometriosis. Studies have also suggested that symptoms and signs of endometriosis tend to improve during pregnancy. While during menopause most symptoms of endometriosis disappear.

Endometriosis stages and symptoms affect 10-15 percent of females during their reproductive years. Studies suggest that 90 million females globally might experience endometriosis during their lifetime. Which leaves this female author to the conclusion; all females from ages 15 to 60 should have yearly gynecology check-ups to possibly detect early signs of endometriosis.

The author of this article at age 49 (at time of writing article) has experienced endometriosis in her early years of child barring. endometriosis symptoms and signs It has been a practice of mine to treat myself and my family (husband included) to a yearly physical, as a birthday present to you. Somewhere around the age of 27, we were still building our family. I had at least 4 miscarriages where the doctors thought everything looked ok, with the exception of my chief complaint of lower stomach pains.

The first miscarriage appeared as if the egg just didn’t catch on. By the last or forth pregnancy we figured out where the root problem was. My husband and I were both very fertile, and needed no help in producing or getting pregnant. Only recently every time I got pregnant the egg did not connect or catch on properly. Although we badly wanted another child, the pregnancies wouldn’t last past the three month mark.

Finally, I decided to investigate or have a check-up while I was not pregnant, and not close to my menstrual cycle. Low and beyond my physician found early stages of endometriosis, at the treatable stage. They completed test on the mass to rule out cancer, which lead them to the diagnosis of endometriosis. Although I was in the early stages of the disease, it was perfect timing to treat and kill the cells. After the test and treatment plan my doctor prescribed, I became pregnant maybe six months after treatment, and that son is now 21 years old.

My advice to all females ranging from 15 through 55 is to have endometriosis symptoms checklist yearly gynecology visits to allow your physician the opportunity to diagnosis endometriosis at its early stage. At the early stage this disease is treatable and could possibly be killed early. And by all means if you are trying to become pregnant, do yourself a favor and have your female organs checked for endometriosis and any other cancerous disease that can lay dormant in your female organs.

cnbc fast money
i m pregnant
citibank student loan
kohls coupon codes
paranormal activity 2 online

Tagged with:
 
  • Kajtzu

    Sad it is US only.

  • http://www.benway.net benwaynet

    We tried blades once. Our issue was we didn’t buy enough servers to fill the chassis (7 of 10) before they changed the blade architecture.
    Plus I always felt like the chassis could be a single point of failure.

  • Awol

    If they had more compelling technology and reasoable price most of the time they wouldn’t have to “give” things away.. Never seen HP or Dell do this because they don’t need to.

  • http://BladesMadeSimple.com/ Kevin Houston

    Spoken like a true #HP fanatic ;) Thanks for the comment wolf!

  • http://BladesMadeSimple.com/ Kevin Houston

    It will always be challenging to overcome the chassis being a single point of failure. The midplane is really the only thing that would be the single point, but all vendors say they offer ‘passive’ midplanes so they should never fail, but never say never. Customers who truely want/need blades and are concerned with reliability often look toward multiple chassis designs. Thanks for your comment!

  • Joe Onisick

    Mid-planes do fail. I had two IBM chassis DOA for a customer about 3 years ago. Took IBm 2 weeks to narrow it down to the mid-plane. Turns out is was a manufacturing defect. The same could easily happen with any other blade architecture. The odds are very very low, but I still like to look at a minimum of 2 chassis in most situations.

    Joe

  • http://h30507.www3.hp.com/t5/Mission-Critical-Computing-Blog/bg-p/199 Jacob Van Ewyk (HP)

    HP has an Integrity Blades Start Kit offer: a free c7000 chassis and Integrity blade with the purchase of HP-UX and support. More information at http://h71028.www7.hp.com/enterprise/w1/en/migrate-to-hp/from-sun-starter-kit.html.

  • Pingback: Kevin Houston

  • Pingback: Joe Onisick

  • Pingback: Stephen Foskett

  • Pingback: Sanbolic

  • Pingback: geek

  • Pingback: Toru OZAKI / 尾﨑亨

  • marrtins

    Yes, it is sad. Be happy to lay my hands on BladeChassis H at last…

  • Art@newmac1.com

    For anybody who is intrested in this promo email me art @newmac1.com (remove the space) and for the guy who had an issue with them changing the blade architecture thats why you go with IBM, they dont make their new blades in-compatable with the old chassis their oldest chassis is still useable.

  • Pingback: IBM System x

  • http://BladesMadeSimple.com/ Kevin Houston

    Thanks for the feedback on blade server failure, Joe. I guess anything is liable to fail given the odds. I appreciate your continued reading!

  • http://BladesMadeSimple.com/ Kevin Houston

    Thanks for the feedback on blade server failure, Joe. I guess anything is liable to fail given the odds. I appreciate your continued reading!

  • http://BladesMadeSimple.com/ Kevin Houston

    Jacob – thanks for letting me know about the #hp free chassis promo. Integrity blades aren’t for everyone so the offer probably isn’t appealing to everyone. My understanding is that IBM’s offer is not dependent on any specific blade purchase, but the promo is up to the partner to pass-thru to the customer, so I’m sure “some” purchase would be required. I appreciate the comment!

  • http://BladesMadeSimple.com/ Kevin Houston

    Jacob – thanks for letting me know about the #hp free chassis promo. Integrity blades aren’t for everyone so the offer probably isn’t appealing to everyone. My understanding is that IBM’s offer is not dependent on any specific blade purchase, but the promo is up to the partner to pass-thru to the customer, so I’m sure “some” purchase would be required. I appreciate the comment!

  • http://BladesMadeSimple.com/ Kevin Houston

    Jacob – thanks for letting me know about the #hp free chassis promo. Integrity blades aren’t for everyone so the offer probably isn’t appealing to everyone. My understanding is that IBM’s offer is not dependent on any specific blade purchase, but the promo is up to the partner to pass-thru to the customer, so I’m sure “some” purchase would be required. I appreciate the comment!

  • http://BladesMadeSimple.com/ Kevin Houston

    Jacob – thanks for letting me know about the #hp free chassis promo. Integrity blades aren’t for everyone so the offer probably isn’t appealing to everyone. My understanding is that IBM’s offer is not dependent on any specific blade purchase, but the promo is up to the partner to pass-thru to the customer, so I’m sure “some” purchase would be required. I appreciate the comment!

  • http://BladesMadeSimple.com/ Kevin Houston

    Art – thanks for the comment, but I don’t want my site to be an advertising ground for your business. I can also sell it in my day-to-day job as VP of Servers at Corus360 in Atlanta, but this forum is not designed to sell, but to educate. Thanks for reading.

  • http://BladesMadeSimple.com/ Kevin Houston

    Art – thanks for the comment, but I don’t want my site to be an advertising ground for your business. I can also sell it in my day-to-day job as VP of Servers at Corus360 in Atlanta, but this forum is not designed to sell, but to educate. Thanks for reading.

  • Pingback: B2BCliff

  • Art

    Sorry Kevin, thought you were just a blogger. Didn’t want to step on any toes.

  • Pingback: What´s the Break-even point to choose Blade Servers? – Making blade servers simple

  • Pingback: Julie Danner

  • Pingback: Andrew Quijano

  • Pingback: Alyshia Burris

  • Pingback: FCC Chiropractic

  • Pingback: Kevin Houston

Set your Twitter account name in your settings to use the TwitterBar Section.
%d bloggers like this: