Tag Archives: blade servers

IBM BladeCenter H Power Recommendation Reference Document

IBM’s BladeCenter H is rich with features, but requires planning before implementing, especially in regards to power.  Over the years, I’ve worked with a lot of customers around the question of what power is needed for the BladeCenter H, so I created a reference document for my use and now I’m sharing it for you to use.  I know IBM has a reference document but mine is focused only on the BladeCenter H and hopefully it is a bit simpler to use.

Link to my document: –> BladeCenter H Power Recommendations – BladesMadeSimple(tm)
(Adobe PDF, 440kb)

Hope this is useful for you.  If you would like the actual Visio diagram I used for this, contact me via email with your info.

2010 Stats for BladesMadeSimple.com

As we wrap up 2010, I wanted to say thanks to the people who continue to support this blog.  I’ve had the opportunity to attend several trips and meet dozens of people in the technology blogger world, and I’ve enjoyed every minute of it.  I have several blog stories in the works for the first part of January 2011, starting with a complete write up of HP and IBM blade offerings after which I will finish up with a summary giving my opinion on who has the best blade server, so stay tuned.  As part of my final blog posting for 2010, I thought it would be fun to give you some details about BladesMadeSimple.com and what  was hot, and what was not, so here we go.

Continue reading →

What’s Your Problem??

I’m deviating from the norm today to ask you a question: what’s your problem?  I ask not in a sarcastic way, but in a serious way.  Writing about blade servers is fun, but I’m looking to write up some posts on what problems blade servers, or x86 servers in general, help solve – and I’m looking for your feedback.  Of course, I could rely on the marketing that vendors provide on how they can “increase your ROI” or “reduce your TCO”, but I want REAL issues from you, the reader, and not a bunch of corporate buzz words. Continue reading →

A Post from the Archive: “Cisco UCS vs IBM BladeCenter H”

It’s always fun to take a look at the past, so today I wanted to revisit my very first blog post.  Titled, “Cisco UCS vs IBM BladeCenter H”, I focused on trying to compare Cisco’s blade technology with IBM’s.  Was I successful or not – it’s up to you to decide.  This article ranks at #7 in all-time hits, so people are definitely interested.  Keep in mind this post has not been updated to reflect any changes in offering or technologies, it’s just being offered as a look back in time for your amusement.  Here’s how the blog post began: Continue reading →

Cisco UCS vs HP Virtual Connect

My friend, M. Sean McGee, wrote up a great blog post in April that deserves revisiting titled, “The State of Statelessness: Cisco UCS vs. HP Virtual Connect“.  In the write-up, he discusses Cisco how Unified Computing System (UCS) blade servers are “stateless” and use “UCS Service Profiles”.  He identifies 96 server settings that can be handled via the UCS Service Profile vs 12 server settings with HP’s Virtual Connect Server Profile.  It is a great read, so I encourage you to take a few minutes and see if you agree with what he writes.

defined benefit plan
megabus promotion code
north kansas city hospital
duns number lookup
new york state department of education

Blade Server Q&A

I’ve been getting some questions via email and I’ve seen some questions being asked in my LinkedIn group, “Blade Server Technologies” so I thought I’d take a few minutes in today’s post to answer these questions, as well as get your feedback.  Feel free to post your thoughts on these questions in the comments below. Continue reading →