Yearly Archives: 2011

HP Flex 10 vs VMware vSphere Network I/O Control for VDI

I once was a huge fan of HP’s Virtual Connect Flex-10 10Gb Ethernet Modules but with the new enhancements to VMware vSphere 5, I don’t think I would recommend for virtual environments anymore. The ability to divide the two onboard network cards up to 8 NICS was a great feature and still is, if you have to do physical deployments of servers. I do realize that there is the HP Virtual Connect FlexFabric 10Gb/24-port Module but I live in the land of iSCSI and NFS so that is off the table for me.

With vSphere 5.0, VMware improved on its Continue reading →

Q3 2011 IDC Worldwide – Steady as She Goes

Hot off the presses is the latest IDC worldwide server market revenue report for Q3 2011. The gist of the report is that while some of the numbers are slightly adjusted, really not much has changed in the blade server market.

Revenue growth for the entire server market (all servers, not just blade servers) slowed considerably showing only 4.2% year over year growth bringing in $12.7 billion. Growth in the world of servers continues but this marks the slowest growth rate for any quarter since Q1 2010. IDC believes that overall server sales will continue to decelerate due to weakening economic conditions around the globe. “After nearly two years of steady revenue growth, the server market began to decelerate in Q3 2011 as demand stabilized for many system categories,” said Matt Eastwood, group VP and general manager. Incidentally, IBM and HP are both holding steady, tied for the #1 spot in revenue share, at 29.8%.

When looking at the blade server market specifically, growth was steady for Q3 2011 but not as explosive as Q2 2011. IDC reports “solid growth” in the quarter with a revenue increase of 16.4% year over year (vs 26.9% growth in 2Q11). Shipments increased 2.4% (vs 6.2% reported growth for 2Q11). One thing that hasn’t changed since last quarter is that 89% of all blade revenue is driven by x86 systems. Also, blade server sales representing  20.8% of all x86 server revenue. This shows continued steady growth for the blade server segment but that the pace may be slowing slightly.

#1 market share: HP managed to hold the majority margin moving to 51.0% in Q3 2011 from 51.9% in Q2 2011.

#2 market share: IBM continues to see its margin chipped away slightly down to 18.5% in Q3 2011 from 19.1% in Q2 2011.

#3 market share: Cisco’s disruptive market penetration seems to have slowed at 10.7% overall compared to a solid 10% in Q2 2011.

#4 market share: Even Dell dropped slightly to 7.2% revenue share from 8.2% last quarter.

In looking at the totals, the top four vendors represented 87.4% of the revenue share in the blade servers market which is actually down 2% from last quarter. Cisco grew revenue share by less than 1% which means that some of the displacement of the remaining top vendors is not accounted for. Does this mean there may be some new players in the “others” category that we should be watching? Without a detailed breakdown it’s hard to tell but I’ll definitely be looking forward to comparing the numbers next quarter to see if the trend continues. It could, after all, just be a factor of the margin of error in the statistics.

According to Jed Scaramella, research manager, Enterprise Servers at IDC, “Blade systems represented the fastest growing segment in the server industry and now account for 16.0% of total server revenue – a historic high.”

Probably the most interesting aspect of the report is the introduction of hyper-scale servers. “Hyper-scale servers are designed for large scale datacenters with streamlined system designs that focus on performance, energy efficiency, and density.” This sounds like the mantra for blade servers with the main difference being the lack of management and high availability capabilities at the hardware level. Basically these represent the miles of simple, rack mount commodity servers used by the likes of Google and Facebook. This is a $428 million dollar server segment and growing.

For the full IDC report covering the Q2 2011 Worldwide Server Market, please visit IDC’s website at http://www.idc.com.

Why Blade Servers Will be the Core of Future Data Centers

In 1965, Gordon Moore predicted that engineers would be able to double the number of components on a microchip every two years.  Known as Moore’s law, his prediction has come true – processors are continuing to become faster each year while the components are becoming smaller and smaller.  In the footprint of the original ENIAC computer, we can today fit thousands of CPUs that offer a trillion more computes per seconds at a fraction of the cost.  This continued trend is allowing server manufactures to shrink the footprint of the typical x86 blade server allowing more I/O expansion, more CPUs and more memory.  Will this continued trend allow blade servers to gain market share, or could it possibly be the end of rack servers?  My vision of the next generation data center could answer that question.

Continue reading →

Nutanix Cluster: Disruptive to Blade Server Market?

 

With all that is made of the competition between blade server manufacturers and the growth of the blade server market in general, is there room for another type of condensed computing in the data center? Have we been going about things all wrong with regard to architecture design?

Nutanix thinks so.

Nutanix is a start-up company geared towards delivering a simplified virtualization infrastructure with a strong focus towards eliminating the need for a SAN. Their clustered solution brings storage and compute together which theoretically reduces expense, reduces complexity, and improves performance. On its own it doesn’t really seem that innovative but the secret sauce is how they make the cluster scale and tier/span data across all nodes without sacrificing performance. Each node has the usual compute resources plus a mix of local SSD and SATA hard disks. There are 4 nodes per 2u enclosure called a “block”. Add more blocks and you have a Nutanix cluster. The software stack scales and balances everything between the nodes and blocks. The technology originated from the architecture that companies like Google and Facebook employ in their data centers. Assuming that can be taken at face value, the scalability potential is phenomenal.

So what’s the big deal?

Well my thinking is that if you can eliminate the need for a SAN (for virtualization) then you can definitely eliminate the need for an enclosure of blade servers. No interconnects. No Enclosure. Simplified network architecture. No SAN. What’s not to love?

Continue reading →

Dell Network Daughter Card (NDC) and Network Partitioning (NPAR) Explained

If you are a reader of BladesMadeSimple, you are no stranger to Dell’s Network Daughter Card (NDC), but if it is a new term for you, let me give you the basics. Up until now, blade servers came with network interface cards (NICs) pre-installed as part of the motherboard.  Most servers came standard with Dual-port 1Gb Ethernet NICs on the motherboard, so if you invested into a 10Gb Ethernet (10GbE) or other converged technologies, the onboard NICs were stuck at 1Gb Ethernet.  As technology advanced and 10Gb Ethernet became more prevalent in the data center, blade servers entered the market with 10GbE standard on the motherboard.  If, however, you weren’t implementing 10GbE then you found yourself paying for technology that you couldn’t use.  Basically, what ever came standard on the motherboard is what you were stuck with – until now.

Continue reading →

Why Are Dell’s Blade Servers “Different”?

I’ve learned over the years that it is very easy to focus on the feeds and speeds of a server while overlooking features that truly differentiate.  When you take a look under the covers, a server’s CPU and memory are going to be equal to the competition, so the innovation that goes into the server is where the focus should be.  On Dell’s community blog, Rob Bradfield, a Senior Blade Server Product Line Consultant in Dell’s Enterprise Product Group, discusses some of the innovation and reliability that goes into Dell blade servers.  I encourage you to take a look at Rob’s blog post at http://dell.to/mXE7iJ. Continue reading →

Customer Success Story with Dell, Citrix and VMware

I always find it interesting to hear how customers are using blade server technology “in the real world.”   Brickworks, a $1.7 billion Australian brick company with over 60 locations and 1,000 employees, recently provided The Australian with details about how Citrix XenApp Enterprise combined with VMware vSphere and Dell rack and blade servers helped develop a more efficient workplace for its employees.  Continue reading →